Matek VRX-1G3 1.3G 9CH 1080MHz - 1360MHz SMA Video Receiver (VRX)

Sold out


  • Receiving Frequency: 9CH, 1080MHz - 1360MHz
  • RX Sensitivity: -95dBm
  • Band-pass Filter: 950MHz - 1450MHz
  • Dual Input Options: 4V - 5V via Pins / 6V - 30V via Pads
  • Button control and LED Indicators: Yes
  • On-board Regulator Output: 5V, 2A @ 6V - 30V Input Voltage
  • Current Consumption: 0.3A @ 5V
  • Video Format: NTSC / PAL
  • Video Output Impedance: 75Ω
  • ANT. Input Impedance: 50Ω
  • Audio Subcarrier Frequency: 6.5MHz / 6.0MHz
  • Connector: SMA
  • Compatibility: FS Module (with 2.54mm pins)
  • Weight: 14g (without antanna)
  • Dimensions: 43mm / 27mm (board only)


  • 1x VRX-1G3 Video Receiver Module
  • 1x SMA Dipole Antenna (1240MHz center frequency)


  • Press and hold the button 2 seconds to enter the frequency setting (frequency LED blinks).
  • Press the button to select the frequency.
  • When the LED blinks at new frequency, RF input is enabled on this frequency.
  • The new frequency will be saved if no button action within 3 seconds.

You recently viewed

Clear recently viewed