Matek HUB OSD8-SE 4x30A PCB ESC

Sold out
$19.99
$18.99
SKU

Manufacturer Description

The HUB OSD8-SE has been engineered to provide the highest possible performance and reliability in a 46mm x 36mm PCB with 4 layers. It's a multi-functional HUB with PDB, BEC 5V / 1.5A, current sensor 184A, and STOSD. The HUB OSD8-SE was specially made for FPV miniquads. The built-in STOSD8 can support plug & play, no complicated settings needed.

Specifications

  • Brand Matek
  • Input TVS Protection: Yes
  • Built-in STOSD8-SE: Yes
  • Battery Input: 9V - 27V (3s - 6s LiPo)
  • Current Rating: 4x30A (4x46A max)
  • Current Sensor: 184A
  • Mounting Holes 30.5mm / 30.5mm
  • Dimensions: 46mm Long / 36 Wide / 4mm Thick
  • Weight: 9g

BEC 10V Outputs

  • Designed for Video TX or FPV camera
  • 10V can be used to power cameras labeled as 12V
  • Short-circuit Tolerant (2 seconds/minute)
  • Voltage: 10.0 +/- 0.2 VDC
  • Continuous Current: 1.5 Amps (2A 10 seconds/minute max)
  • Output Ripple: 15mV (V in = 24V, V out = 10V @ 1.5A)

BEC 5V Outputs

  • Designed for RC Receivers, Flight controllers, OSD, and Servos
  • Short-circuit Tolerant (2 seconds/minute)
  • Voltage: 5.0 +/- 0.1V DC
  • Continuous Current: 1.5 Amps (2A 10seconds/minute max)
  • Output Ripple: 23mV (V in = 24V, V out = 5V @ 1.5A)

STOSD8

  • Auto-detect PAL / NTSC
  • Dynamic on screen info
  • Automatic flight timer
  • Automatic cell detection
  • Low battery alarm
  • Exceeding mAh alarm
  • Minimum voltage & max current recorder
  • Onscreen pilot ID
  • Firmware upgradable
  • Simple GUI & setting
  • Plug & Play

Components

  • 1x HUB OSD8-SE PCB ESC

You recently viewed

Clear recently viewed