Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Specifications
- Brand: Matek Systems
- MCU: 216MHz, STM32-F722-RET6
- IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
- Baro: BMP280 (I2C)
- OSD: AT7456E (SPI)
- Firmware: BetaFlight / INAV
- Target: Matek F722SE
- Blackbox: MicroSD Card Slot (SPI)
- Camera Control: Yes
- Smartaudio & Tramp VTX Protocol: Yes
- WS2812 Led Strip: Yes
- Beeper: Yes
- RSSI: Yes
- Vbat Filtered Output Power for VTX, Switchable via AUX (modes tab-user1)
- Dual Camera Image, Switchable via AUX (modes tab-user2)
- Additional ADC for INAV Analog Airspeed
Power
- Input: 6V - 36V (3s - 8s LiPo, with TVS protection)
- PDB: 4x35A (Max 4x46A)
- BEC: 5V, 2A Continuous / 3A Max
- LDO 3.3V: Max.200mA
- Current Sensor: 184A (Scale 179)
- Battery Voltage Sensor: 1:10 (Scale 110)
Built-in Parts
- 5x UARTs (1,2,3,4, and 6, with build-in inversion)
- 1x Softserial Supported
- 8x PWM Outputs (Dshot/Proshot/Oneshot/Multishot)
- 1x I2C
- 4x RX6 Pads (one per corner, for BLHeli-32 ESC telemetry)
- 4x Individual ESC Power / Signal Pads
- 1x Group of G/S1/S2/S3/S4 Pads (for 4-in-1 ESC Signal / GND)
- 3x LEDs for FC Status (Blue, Green) and 3.3V Indicator (Red)
Components
- 1x F722 SE Flight Controller
