Matek F722 Mini OSD Flight Controller

Sold out
$44.99
SKU

Specifications

  • Brand: Matek Systems
  • MCU: 216MHz, STM32-F722-RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros Built-in (SPI)
  • OSD: AT7456E (SPI)
  • Firmware: BetaFlight / INAV
  • Target: Matek F722SE
  • Blackbox: 32M-byte Flash Memory (SPI)
  • Baro: No (supports external barometer module (I2C))
  • Camera Control: Yes
  • Smartaudio & Tramp VTX Protocol: Yes
  • WS2812 Led Strip: Yes
  • Beeper: Yes
  • RSSI: Yes
  • Mounting: Convertible 20mm to 30.5mm
  • Vbat Filtered Output Power for VTX,  Switchable via AUX (modes tab-user1)
  • Dual Camera Image, Switchable via AUX (modes tab-user2)
  • Additional ADC for INAV Analog Airspeed

Power

  • Input: 6V - 36V (2s - 8s LiPo)
  • BEC: 5V, 2A Continuous / 3A Max
  • LDO 3.3V: Max 200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • Current Sensor: No (supports external current sensor of PDB)

Measurements

  • Mounting
    • 20mm / 20mm, Φ3mm with Silicon Grommets
    • 20mm / 20mm, Φ2mm with Silicon & Brass Grommets
    • 30.5mm / 30.5mm, Φ3mm with Conversion Plate & Silicon Grommets
  • Dimensions: 28mm / 28mm
  • Weight: 5g

Built-in Parts

  • 5x UARTs (1,2,3,4, and 6, with build-in inversion)
  • 1x Softserial Supported
  • 8x PWM Outputs (Dshot/Proshot/Oneshot)
  • 1x I2C
  • 1x SH1.0, 8pin Connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
  • 3x LEDs for FC Status (Blue, Green) and 3.3V Indicator (Red)

Components

  • 1x F722 Mini Flight Controller
  • 1x 20mm to 30.5mm Conversion Plate
  • 6x Silicon Grommets (M4 to M3)
  • 6x Brass Grommets (M3 to M2)
  • 1x SH1.0, 8pin Cable (5cm)
  • 2x SH1.0, 8pin Connectors

You recently viewed

Clear recently viewed