Manufacturer Description
The Flyduino KISS 32A ESC, powered by a M4 MCU, is the new member in the KISS family, developed for race copters with power hungry motor/prop combinations. Actively limited to 45A for longevity, the ESC comes with all the features of its little brother, the ESC 24A RE. With a capacitor, it can be driven by up to 6s LiPos. This ESC is also compatible with Dshot2400 for an incredibly low response time.
Features
- 32bit-ARM Cortex M4 MCU @ 80 MHz
- Telemetry capability (voltage, current, temperature, rpm)
- Over current protection (measures the current and reduces it to max 45A)
- Over temperature protection (reduces the max power if hotter than 100°C)
- sinHybrid - Sinwave / BackEMF hybrid for smoother running
- Dshot 2400 (Full resolution of 2000 steps takes only 6.5μs)
- Supports all common Dshot commands like turtle mode, 3D mode and rotation direction change
- Expanded adaptive auto timing (3,25-30° advance on each commutation)
- For Race Multicopters (32A continuous also with weak cooling)
- High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor)
- Small size (19 x 27 mm)
- Accurate RPM control (2000 steps using Dshot)
- No additional capacitor needed for 3s - 5s. Add a min. 220μF min. 50V Cap for 6S usage!
- Very fast throttle response, linear throttle response, active freewheeling (low diode losses)
- Regenerative braking
- 3s - 6s LiPo
- Dshot 100-2400, Oneshot42, Oneshot125 and normal (25 – 500Hz) PWM auto-detected
- Supports FrSky Sbus, Graupner SumD, Multiplex SRXL, S-Port, Graupner HOTT, TBS Crossfire, and Sensorbus
- Operating voltage 9 - 30V (3-6s)
- Maximum continuous current 32A, instantaneous maximum current 45A, actively limited
- 600000 ERPM maximum rotation field speed (useage up to 500000 recommended)
Specifications
- Brand: Flyduino
- Current Draw: 32A Continuous (45A Burst)
- Voltage Range: 2s - 6s LiPo
- Weight: 3.3g
- Dimensions: 20mm Long / 26mm Wide / 4.5mm Thick
Components
- 1x KISS 32A ESC - Race Edition