Diatone Mamba F722S OSD BEC Flight Controller

by Diatone
Sold out

Manufacturer Description

The Mamba F722S Flight Controller has every connection you could want, with Bluetooth on top of that. Just have a look at the wiring diagram below. It also has pads broken out for 4 RGB LED strips and a dedicated LED controller. This FC has a lot going on! There's a prebuilt stack option as well. Diatone has also crammed this FC (minus the bluetooth and LED controller) into a 20x20 Mamba F7 option. 

Note: The STM32F722 generates a decent amount of heat, so please leave at least 5mm either side of the FC in your stack to allow adequate air circulation.


  • Brand: Diatone
  • Input Voltage: 3s - 6s, 12.6V - 25V
  • VTS Protection: Yes
  • MCU: 216MHz, STM32F722RET6, 32bit
  • IMU: MPU6000
  • OSD: BF OSD, AT7456E
  • Black Box: 16MB Flash Memory
  • Uarts: 6
  • ESC Soft: Dshot300 / 600 / 1200
  • ESC Telemetry: RX6
  • Firmware: Betaflight (Target: Mamba F722)
  • BEC: 5V, 2A / 9V 2A (Max 3A)
  • Current Sensor Input: ESC Telemetry & Current ADC
  • Smart Audio: Yes
  • RSSI: Yes
  • Buzzer: Yes
  • LED: Blue & Orange for FC Status, Green 9V, White 5V, Red 3.3V
  • LED Controller: 4 Set, 2812 LED
  • Barometer: No
  • Bluetooth: SpeedyBee App
  • Mounting: 30.5mm / 30.5mm, M3
  • Weight: 6g


  • 1x Diatone Mamba F722S Flight Controller
Diatone Mamba F722S Flight Controller Wiring Diagram

You recently viewed

Clear recently viewed